Another Echolink Interface card
I received another circuit for Echolink Interface Card highlighted
from a Ham station, Lik Wei, now in Perth, Australia.
Happy trying out this circuit!
Also thanks go out to www.Buxcommco.com for the design.
from a Ham station, Lik Wei, now in Perth, Australia.
Happy trying out this circuit!
Also thanks go out to www.Buxcommco.com for the design.
10 Comments:
Any lubang where got the 13 pin mini din plug??
By Anonymous, at 11:10 PM
itu 13 pin plug is one of the rigs connector, I think is kenwood plug.
LW
By Anonymous, at 9:22 AM
U can get it from Pasar Road..KL
Its an audio connector plug
By 9W2SSJ, at 10:44 AM
Any kind soul willing to source for me? I need 1 for my Icom interface. Willing to pay for your efford.
By Anonymous, at 1:05 PM
9w2ssj - can you give me the name of the shop? Maybe I can ask a friend to get it for me. TQ.
By Anonymous, at 11:39 PM
This comment has been removed by a blog administrator.
By Anonymous, at 2:09 AM
This comment has been removed by a blog administrator.
By Anonymous, at 2:10 AM
Ah Meng,
I can get it for you..but I was wondering why you want to get the
13 pin mini din plug..?
What type of Ham radio rig are you using?
Its better to get the cables made
specially for your rig, and cheaper too..
By 9W2SSJ, at 4:38 PM
I am using an Icom IC-718.
The plug is for the computer interface. Would prefer if it comes with wire too. Thanks.
By Anonymous, at 11:55 PM
Simple Radio PTT To Computer Interface Circuits
SSTV, PSK31, RTTY, CW, EchoLink, eQSO Etc.
Digital communication modes represent one of the fastest growing areas of interest in amateur radio, with the past decade seeing many developments. Over the past few years the data modes like SSTV and PSK31 are now more common place. EchoLink and eQSO can be used as the interface for your gateway.
http://www.radiohamzone.com/
http://www.freewebtown.com/hamradio/Simple_Radio_PTT_To_Computer_Interface_Circuits.htm
http://www.freewebtown.com/hamradio/PTT_Interface_2_Radio.htm
By Rodney Yeo @ rodyeo.dyndns.org, at 8:36 PM
Post a Comment
<< Home